Home Page

Product Information

Technical Information

Projects & Customers

Details & Downloads

Information Request

Contact Us

 

 

 

ASTM  TESTING

Metposite has been tested according to ASTM standards for air and water infiltration as well as structural and fastener adhesion. As the follow results below indicate, the system preformed outstandingly well in all four tests.

ASTM E 283-04 

Air Infiltration 0.00 CFM. (No Leakage) at 300 Pa (6.24 psf)

ASTM E 331-00 

Water Penetration: 0.00 CFM. (No Leakage) at 729 Pa (15.0 psf) 

ASTM E-72 

Structural Performance: Individual panel average ultimate load (held for one minute) 117lbs

ASTM E-1761a. 

Fastener Pull Through: Using a #8 modified truss head / phillips wafer head screw) average pull through or screw failure 881lbs.

Testing Conducted By Intertek Testing Services NA Ltd Complete report available on request 
 

Click Here for Printable and
Downloadable Versions of this File
Click Here To View
Transverse Load Chart

This allow you to appreciate the cost saving from using the Metposite System in place of high price aluminum composite systems and still have the confidence that your wall panel system will perform up to industry standards.

Web Site Designed by Shadow Graphix    www.shadowgx.com

info@metposite,com    503.981.5900

Metposite LLC  2008 All right reserved